The Netgear WBC502 Insight Airbridge is designed to render the coverage up to 9000 square feet. It is especially for large apartments, businesses, multiplexes, and other buildings. By deploying at different locations, it advances the existing coverage. It arrives with a master and a satellite. It is useful if deployed by viewing the line of sight. Ideal solutions for deploying it in the office wirelessly. The LED lights symbolize the signal strength and offer you to adjust it if installed inaccurately. Several operational modes are ready in Netgear WBC502 Insight Airbridge as local management with outdoor access.
The weather resistance properties offer this Airbridge to install in outdoor conditions as it can tackle snow, wind, dust, etc. A dual-band Netgear WBC502 Insight Airbridge has two Gigabit Ethernet ports which are connected to the LAN network while the other to the outdoors such as IP cameras. If you want to increase the speed, then locate it within a distance of around 500 feet to experience a compelling speed of 500 MBps. The effortless setup allows you to do it with an app or website. The wall-plug design saves additional hardware money. Now we tell you the steps to change the Netgear wireless Airbridge mode.
How can you change the Netgear WBC502 Insight Airbridge mode?
You can pick the Airbridge mode only if the working mode of the Netgear WBC502 Insight Airbridge is master or a satellite. You had to enable or disable both the satellite and master. Evade enabling master and disabling satellite or vice versa. The Airbrodge mode is selected by default when it arrives from the manufacturing box.
Nevertheless, you can disable the mode. It usually depends upon the situation of the network as well as your WiFi demand. Disabling the Airbridge mode will cause a change in Airbridge. To change the Airbridge mode, go after these uncomplicated instructions.
Chase the Login Interface
You need to first chase the login page of the Airbridge to change the mode of the Netgear WBC502 Insight Airbridge. To do so, follow the below instructions carefully.
Firstly, start the browser from the PC. It is suggested to use Google Chrome, Microsoft Edge, Internet Explorer, Mozilla Firefox, or Apple Safari browser to get the best experience. Get sure that both the Airbridge and the computer are connected to the identical network. Secondly, chase the Airbridge login interface. You can also type the IP address assigned by the Airbridge. Now typewrites the username as well as the passphrase. Admin is the default username of the Netgear WBC502 Insight Airbridge. The passphrase is the one that you had configured. Now hit the login symbol to reach the login interface.
Configure the Settings
Once the login page appears, the Netgear WBC502 Insight Airbridge status page with the info section and other details will be presented. Now click the network field and later click wireless. The wireless settings interface is presented. Now pick one of them to enable or to disable. Tick the enable icon to enable or disable it by clicking the checkbox. After that, hit the save icon. A new interface with the settings you made has been displayed.
A fresh dialogue box with apply option displays. Hit the apply icon now. If the WiFi link is restored, then it presents the number of seconds where the Airbridge is online. For more details, you can check the Netgear Insight user manual. It will guide you to install and configure the master and the satellite.
Netgear WBC502 Insight Airbridge Review
I purchased this item last year and it is working pretty fine. It is the first time I am buying the Netgear WBC502 Insight Airbridge. I usually use the extender in my office to extend it. But this device works very well. It arrives with a master and a satellite. It is helpful if stationed by seeing the line of sight. Ideal solutions for stationing it in the office wirelessly. The LED lights express the signal strength and enable you to improve it if placed inaccurately.
The different operational modes are ready in Netgear WBC502 Insight Airbridge as local management with outdoor access. The installation takes almost three to four days. It is complicated. Nevertheless, the settings can be configured by installing the nighthawk app too. Other than the installation, it is ideal for installing in large apartments, offices. I highly prefer the user who is looking to purchase this item first.
Does the Brostrend WiFi Extender work as an adapter to smart TVs?