The Tplink WiFi Access Point is a wireless dual-band network standard & 802.11ac latest technology WiFi access point. The 3×3 MU-MIMO technology is built-in in this access point that allows communication of multiple devices at a time. Additionally, the 6× internal Omni Antennas is built-in inside the access point that extends the wireless network. The 5GHz dual-band network delivers 1300Mbs in the entire home.
However, the 2.4GHz network is also the most powerful & delivers superior network coverage. For multiple devices & long distances, the Tplink WiFi Access Point is a superior & most ideal device. Every networking device easily gets network connectivity in all the areas of your home. The TP-Link Auranet Controller software allows management & monitoring of the network in a simple manner.
Moreover, in the access point device, the 1x Gigabit Ethernet RJ 45 Port is powered by that allows establishing the wired connection. This access point device completely supports Power over Ethernet 802.3at for convenient and affordable installation. If you wish to change the login default admin password of this device, then you should get the login page. By mentioning tplinkap.net in the web interface, you can securely access the login page.
Why is it important to set up an internet connection of Tplink WiFi Access Point?
The Tplink WiFi Access Point device delivers superior & high-range wireless network speed. The network coverage of this device is more & higher than the traditional wifi router as well as range extender device. The strong wireless signals absolutely cover the entire home along with all rooms. But sometimes, the network connectivity is slow, due to the user not being able to enjoy network connectivity in all rooms of your home.
To seamlessly enjoy the internet connectivity, you have to perform the internet connection setup. Then, internet connection setup is most important to properly enjoy the network connectivity in the whole home.
Some steps: Internet Connection Setup Of Tplink WiFi Access Point
The internet connection setup is most important to properly enjoy the network connectivity in all areas of your home. To access the high & fastest network speed in the entire home, you have to select the Tplink WiFi Access Point device position.
Select the position of the access point
To set up the internet connection, you have to select the position of your access point device. Because the location is major to enhance the network connectivity. The access point device location should not be located in a place where it will be exposed to moisture or
excessive heat. You located an access point device where it can be connected to various devices as well as to a power source. This is the best location for your access point device. Ensure the location of this device is not near the heating source as well as devices like microwave & refrigerator. Make sure the cables and power cord are safely placed out of the way so they do not create a tripping hazard. After selecting the position of your access point device, you have to perform the setup.
Access point mode
The tp-link wireless access point device completely supports four modes like an access point, range extender, client modem & multi-SSID mode. To set up the internet connection, you have to configure this mode. The Tplink WiFi Access Point modem absolutely transforms your existing wired network into a wireless one. This mode is suitable for dorm rooms or homes where there’s already a wired router but you need a wireless network.
By using the default ip of this device, you have to properly log in to the account. Then, a quick start setup wizard is pop-up. You have to click the next button to start the setup. In the operation mode, you have to select the access point mode.
Configure range extender mode
The Tplink WiFi Access Point supports extender mode, the extender mode increases the range of an existing WiFi network. This mode is suitable when you are in a WiFi dead-zone or a place with a weak wireless signal, and you want to have a larger effective range of the wireless signal throughout your home or office. By using tplinkap.net login you have to access the login page, & insert login ID into the following field. Then, in the operation mode, you have to select the range extender mode in the following modes.
Client mode
The client modem of the Tplink WiFi Access Point connects your wired devices to a wireless network.
This mode is most suitable when you have a wired device with an Ethernet port and no
wireless capability. In the operation mode, you have to select the client mode & click the save option to save this mode.
How to know about the Online information Speedefy WiFi router?