How to Replace a Fan in Synology 8 Bay DS1817 NAS Diskstation?

Share With Friends

The Synology 8 Bay DS1817 is designed with a quad-core storage solution with expandable memory of 8 GB. It supplies excellent writing and reading throughput of 739 MBps and 1577 MBps respectively. The inbuilt fan on its back makes this device cool by exhaling the hot air. Its operating temperature is around five to forty degrees celsius. Two RJ45 ports restrict this device from failover and backlink aggregation. It carries a huge storage capacity and is thereby suitable for home as well as large companies to store their data securely. Just add the extra units to experience more storage. 

The Synology multimedia set proposes you store music, videos, and photos in one location. You can stream from your Synology 8 Bay DS1817 to the device as per your need. The bulletproof backup of files features to restore the erased files with Synology security and safety. You can install 2.5 inches and 3.5 inches SATA HDD and SSD. It provides smart monitoring and video management tools such as IP cameras with live streaming and more. Now we tell you the steps to replace the defective fan with a new one to run the Synology device more effectively.

How to Replace a Fan in Synology 8 Bay DS1817 Diskstation?

Many conflicts may arise while utilizing the Synology device. It is commendable to understand the Synology 8 bay NAS DiskStation DS1817 manual to spot the problem. If the Synology 8 Bay DS1817 will sound like a beeping voice if the fan is not working properly. There are two fans in the Synology 8 Bay DS1817 device. Remove the defective fan and place a new one. Follow the advice to do it.

Remove the Defective Fan

Power off your Synology 8 Bay DS1817 device by disconnecting all the cables to ensure protection against any hazard. Unscrew all four corner screws to open the fan panel. Remove the defective fan from the Synology 8 Bay DS1817 device. Unattached the fan wire position around the fan socket and then uncased the fan panel. Now remove all four screws of the defective fan and then remove the fan.

Install a New Fan

Replace the defective fan with a fresh one and then harden all four screws of the fan. Attach two wires to the connectors around the fan socket bottom and then position the fan panel. Harden all the four screws and join all the wires you disconnect. Now push the power switch and power on your Synology 8 bay Diskstation. Now we tell you the steps to install the DSM on your device with a web interface. Just follow the below info.

Install DSM on Synology 8 Bay DS1817 NAS Device

After accomplishing the hardware installation, then install the DSM on your device. The NAS device is equipped with an inbuilt mechanism called Web Assistant. This tool helps you to catch the latest available version of DSM and offers you to download it. To install the DSM these are the basic needs that you should complete.

Firstly, assure that your 8 Bay DS1817 is connected to the internet and you have a web browser installed on your device. Secondly, get sure that 8 Bay DS1817 device and the PC are connected to the identical local network. After ensuring the above two conditions, go after to install the DSM.

Turn on Diskstation and open a web browser on your PC. Typewrite find my synology nas in the explore box. The web assistant is opened on your web browser and it will hunt for Diskstation with a local network. Next, the device presents on the screen and hits connect. To initiate the setup procedure, go after the info described on the screen. 

Final Words For Synology 8 Bay DS1817

Here we came to the final words section. As we discussed earlier, it is a great device with the best writing and reading throughput. The inbuilt fan on its rear does this device cool by exhaling the warm air. Its working temperature is about five to forty degrees celsius. Two RJ45 ports restrict this device from failover and backlink aggregation. If you are facing a problem regarding the fan, replace it with a new one.

The replacement of a defective fan with a new one with a full guide is mentioned above. You can check from there. Also, follow the steps to install the DSM on your device. Overall, a perfect device for home and business purposes.

How To Get Rid with Nexxt Kronos301 Signal Repeater Poor Signal?

Leave a Reply

Your email address will not be published.